 |
 |
| SSG-2026T-DE2R24L |
- SuperStorage 2026T-DE2R24L (Black)
|
| |
|
2x Super X8DTS-F-2U |
| |
|
| CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere)
- Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
|
| QPI |
|
| |
|
| Memory Capacity |
- 6x 240-pin DIMM slots
- Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
| Memory Type |
- 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
| SAS/SATA* |
|
| SAS2 Expander |
-
- Scalability through cascading
- 6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82599EB controller for Dual 10 Gigabit Ethernet interconnection between nodes
- Intel® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Graphics |
|
| Super I/O |
|
| |
|
| PCI-Express |
- 3 (x8) PCI-E 2.0 slots (can be used for host or storage expansion)
|
| |
|
| SAS |
- 4x 6Gbps JBOD expansion ports
|
| LAN |
|
| USB |
- 2x USB rear ports (via KVM cable)
- 1x USB on-board (TypeA)
|
| VGA |
- 1x VGA Port (via KVM cable)
|
| Serial Port / Header |
- 1 console port (via KVM cable)
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- Alarm Mute Switch
|
| LEDs |
- Power LED
- Hard Drive Activity LED
- 2x Network Activity LED
- System Overheat LED
- Power Fail LED
|
| |
|
| Hot-swap |
- 24x Hot-swap 2.5" Drive Bays shared between server nodes
- SAS or enterprise SATA HDD only recommended
|
| |
|
SAS2 dual Expander Backplane, features:
• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management
• Redundancy dual ported SAS architecture
• Robust AirMax server node connections (SBB specification) |
| |
|
|
| Fans |
|
| |
|
| Redundant 1200W high-efficiency power supply with PMBus |
| AC Input |
- 1000W Output @ 100-140V, 11.5-8A, 50-60Hz
- 1200W Output @ 180-240V, 8-5.5A, 50-60Hz
|
| DC Output |
- 1000W: +12V/83A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
|
DC Output
with PDB |
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
| Certification |
Gold Certified
[ Test Report ] |
| |
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 12 fan headers supporting up to 12 fans
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 12x fan connectors
- PECI
|
| |
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
